MenuSearch | Country: Denmark | Currency: EUR
Excellent
3,736 reviews at Trustpilot.3,736 reviews
5x Stella ARGB 120mm Fans plus AMBER5 ARGB Controller Combo Pack €40,76
28 in stock
Add to Basket
More variations available Show

Gelid Solutions 5x Stella ARGB 120mm Fans plus AMBER5 ARGB Controller Combo Pack

Gelid introduces a perfect mixture of top-notch technologies with a vivid design. This pack comes with five Stella 120mm ARGB fans and an AMBER5 controller to allow you to not only control the fan speeds but also the ARGB lighting the fans offer.

Features

  1. Combo pack, saving up to £20 compared to individual price
  2. Supplied with 5x STELLA ARGB fans and AMBER5 controller
  3. 366 Pre-Programmed RGB Modes
  4. 21-key RF Remote Control Unit
  5. ARGB Sync Compatible

The Fans

Gelid’s STELLA 120mm fans come with 8 hub-mounted ARGB LEDs and 16 frame-mounted ARGB LEDs that illuminate in a stylish Dual Ring array. The fan also boasts double ball bearings for improved reliability and optimised impeller for enhanced airflow. Vibrant lights, robust build and low-noise operation all make STELLA a worthy companion for PC rigs.

The Controller

The AMBER5 controls up to five fans, LED strips or other Addressable RGB (ARGB) devices and features 366 carefully selected collection of pre-programmed and vivid lighting presets for dynamic RGB effects. The AMBER5 also supports a passthrough ARGB Sync/Hub Mode via the 3-pin ARGB Sync input while connected to a compatible ASUS, Gigabyte, MSI or ASRock motherboard. You are free to use the controller presets or switch to your own presets designed in your favorite RGB software.


Specifications5x Stella + AMBER5
Model NumberRF-RGB-MP-01
STELLA Fan Specifications-
Air Flow (CFM)70 max
BearingDouble Ball Bearing
Cable Length (mm)500 (PWM & RGB)
Power Draw (W) 85 max.
DC Voltage (V)12
Dimensions (mm) 86 x 40 x 7
Fan Life Time MTTF at 40C (h)100,000
Fan Speed (RPM)500 – 1600
Noise Level (dBA)35 max
Static Pressure (mmAq)1.3
Fan Connector4-Pin PWM Header
RGB LED Connector3-Pin Addressable RGB Header (5V)
Weight (g) 15
Included 1 x CR2025 Battery
Controller Unit Specifications-
PWM Fan Outputs 5x 4-pin PWM Fan Header
ARGB Outputs 5x 3-pin ARGB Header
PWM Fan Voltage (V) 12
ARGB Volage (V)5V only
Per-Channel PWM Fan Current (A) 1 max.
Per-Channel ARGB Current (A) 1 max.
Power Supply SATA Connector
Inputs 1x Power SATA, 1x PWM Control, 1 x 3-pin ARGB
RF Remote Specifications-
Number of Keys 21
RC Method Radio Frequency (RF 433M)
RC Range (m) 8
Number of RGB Modes 366
Static Brightness Levels 8
RGB Switching Speed Levels 8
Warranty24 months
EAN barcode4897025782716
Specifications5x Stella + AMBER5
Model NumberRF-RGB-MP-01
STELLA Fan Specifications-
Air Flow (CFM)70 max
BearingDouble Ball Bearing
Cable Length (mm)500 (PWM & RGB)
Power Draw (W) 85 max.
DC Voltage (V)12
Dimensions (mm) 86 x 40 x 7
Fan Life Time MTTF at 40C (h)100,000
Fan Speed (RPM)500 – 1600
Noise Level (dBA)35 max
Static Pressure (mmAq)1.3
Fan Connector4-Pin PWM Header
RGB LED Connector3-Pin Addressable RGB Header (5V)
Weight (g) 15
Included 1 x CR2025 Battery
Controller Unit Specifications-
PWM Fan Outputs 5x 4-pin PWM Fan Header
ARGB Outputs 5x 3-pin ARGB Header
PWM Fan Voltage (V) 12
ARGB Volage (V)5V only
Per-Channel PWM Fan Current (A) 1 max.
Per-Channel ARGB Current (A) 1 max.
Power Supply SATA Connector
Inputs 1x Power SATA, 1x PWM Control, 1 x 3-pin ARGB
RF Remote Specifications-
Number of Keys 21
RC Method Radio Frequency (RF 433M)
RC Range (m) 8
Number of RGB Modes 366
Static Brightness Levels 8
RGB Switching Speed Levels 8
Warranty24 months
EAN barcode4897025782716

Product Resources

FAQ

  • How do I measure fan size?

    The size of fan you need will generally be determined by the size of the fan fitting position in your PC case. The sizes of all the fans on our website are shown as measured along any one of the fan’s four sides, NOT the distance between the fan’s screw holes! Our most popular fan size is 120mm, followed by 80mm. This isn’t really dictated by customer preference, but more by recent designs of PC cases.

    As for the thickness (depth) of the fan, generally 25mm (1 inch) is by far the most common depth, although smaller fans can have shallower depths such as 15mm or even 10mm. All our fans are 25mm thick unless otherwise stated. If you have any questions about which fan you should order, please don’t hesitate to get in touch.

    If you know the distance between the fan mounting screw holes but don’t know what fan size to order, please see the following table. Note that the mounting hole measurements shown below are taken horizontally or vertically between the holes and not diagonally.

    Screw hole spacings and fan sizes

    32mm between screw holes:40mm fan size
    40mm between screw holes:50mm fan size
    50mm between screw holes:60mm fan size
    60mm between screw holes:70mm fan size
    72mm between screw holes:80mm fan size
    83mm between screw holes:92mm fan size
    105mm between screw holes:120mm fan size


  • I received a small cable (resistor) with my fan; what is it for?

    The resistor cable (also called Ultra Low Noise or ULN cable) is designed to allow the fan to run slightly slower for even quieter operation. The benefit in lower running noise is significant. Although the airflow will be reduced slightly, this usually has minimal effect on PC temperature. We would generally recommend using the ULN resistor cable for best results in almost all circumstances.

  • How can I tell which way the air blows through the fan?

    Hold the fan so that the round fan sticker is facing you. You are looking at the rear of the fan. When you plug the fan in, the air will be blowing towards you. If you want a fan to act as an air intake, then the fan sticker will be facing the inside of the case. Some fans also have two small arrows moulded into their plastic housing - one arrow shows the direction of airflow, and the other (at 90°) shows the direction of blade rotation.

  • Is it possible to use a 4-pin PWM fan or CPU cooler with a motherboard which has only 3-pin fan headers on it?

    Electrically, there is no problem doing this - the fourth pin on the fan cable is used purely for PWM control and is not needed in order for the fan to run. So you can plug the 4-pin fan connector onto the 3-pin motherboard fan header, leaving the fourth pin not connected to anything. The fan will potentially run at full speed, so if you would like to reduce the speed of the fan you will need to adjust the fan speed setting in your BIOS or use fan control software such as SpeedFan in Windows.

    The only other problem to consider is that occasionally, components immediately adjacent to the motherboard fan header can get in the way of the larger 4-pin fan connector, physically preventing connection. This problem also occurs if you try to use an in-line fan speed controller such as the one made by Gelid.

    Another avenue to explore is the possibility of using a bay-mounted fan controller. Several models are available now which provide 4-pin fan headers, so this is an easy way to use 4-pin PWM fans in a PC system which has only 3-pin fan headers on its motherboards. When using this method, you may find it necessary to disable any fan warning settings in your motherboard BIOS, since the motherboard may incorrectly believe that its CPU fan has failed when the fan is connected to a fan controller rather than directly to the motherboard itself.

Top Ultra-Quiet 120mm fans

Recently Viewed Products

“A carefully constructed system, built and delivered quickly.”

“Bought a system based on their Serenity Mini Gamer profile for Linux development, VM hosting and number-crunching use. Nice and quiet, stays cool enough during prolonged load even on the low fan settings. All manuals and additional cables and fixings supplied as promised. Well constructed with all cables tidied and ready for addition of my own components - I was up and running in minutes.

Had a post-sale support question that was answered correctly straight away.

Can’t fault the product or the firm, you get what you pay for. Highly recommended.”

(Review via Trustpilot)